Lexmark 7462 series - Page 68

Error code Description Action
201.30 Operator panel door assembly interlock switch
failure (type 2 fuser)
The printer detected that the switch (operator
panel door interlock) did not cycle prior to printer
restart.
Go to
“Operator panel door assembly switch
failure service check” on page 81.
201.31 Sensor (narrow media) late jam (type 2 fuser)
The expected wide media is late reaching the
sensor (narrow media) within the specified time.
Go to
“Sensor (narrow media) late jam service
check” on page 78.
201.32 Sensor (fuser output) late jam (type 2 fuser)
The media is late reaching the sensor (fuser
output) within the specified time.
Go to
“Sensor (fuser output) late jam service
check” on page 83.
201.50 Sensor (fuser output) late jam (type 2 fuser and
fuser page count exceeds life)
The media is late reaching the sensor (fuser
output) within the specified time.
201.51 Main drive motor assembly load error (type 1 fuser
and fuser page count exceeds life)
The main drive motor assembly has failed or
caused high mechanical load due to paper jam or
bind.
Go to
“Main drive motor assembly load error
service check” on page 80.
201.52 Sensor (fuser output) late jam (type 1 fuser and
fuser page count exceeds life)
The media is late reaching the sensor (fuser
output) within the specified time.
Go to
“Sensor (fuser output) late jam service
check” on page 83.
201.53 Image data did not start in time (type 1 fuser and
fuser page count exceeds life)
Printhead write failure
Go to
“Printhead write failure service check”
on page 85.
201.54 Sensor (narrow media) late jam (type 1 fuser and
fuser page count exceeds life)
The media is late reaching the sensor (fuser
output) within the specified time.
Go to
“Sensor (narrow media) late jam service
check” on page 78.
201.55 Operator panel door assembly interlock switch
failure (type 1 fuser and fuser page count exceeds
life)
The printer detected that the switch (operator
panel door interlock) did not cycle prior to printer
restart.
Go to
“Operator panel door assembly switch
failure service check” on page 81.
201.56 Sensor (narrow media) late jam (type 1 fuser and
fuser page count exceeds life)
The media is late reaching the sensor (fuser
output) within the
specified
time.
Go to
“Sensor (narrow media) late jam service
check” on page 78.
7462
Diagnostic information
68