Lexmark X95 series - Page 141

Diagnostic information 2-91
7558-xxx
Go Back
Previous
Next
4
Check the registration drive
motor for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration motor.
Does the above component
operate properly?
Go to step 6. Go to step 5.
5
Check the registration motor for
proper connection.
Is the above component
properly connected?
Replace the registration drive
motor.
Go to “Registration drive motor
removal” on page 4-147.
Replace the connection.
6
Check the media transport/MPF
drive motor for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Tray [x] feed/lift
motor (pick)
5. Touch Tray [x] feed/lift
motor (feed).
Does the above component
operate properly?
Go to step 8. Go to step 7.
7
Check the media feed/lift motor
for proper connection.
Is the above component
properly connected?
Replace the media feed lift motor.
Go to “Media feed lift motor
removal” on page 4-121.
Replace the connection.
8
POR the machine, and perform a
PRINT test.
Go to “PRINT TESTS” on
page 3-25.
Does the error continue?
Replace the lower engine PCBA.
Go to “Lower engine PCBA
removal” on page 4-104.
Problem resolved
Step Action and questions Yes No