Lexmark X95 series - Page 150

2-100 Service Manual
7558-xxx
Go Back
Previous
Next
5
Check the registration drive
motor for proper connection.
Is the above component
properly connected?
Replace the registration drive
motor.
Go to “Registration drive motor
removal” on page 4-147.
Replace the connection.
6
Check the 2nd transfer roller
contact retract motor assembly
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch 2nd Transfer Rollers
Retract Motor (contacted).
5. Touch 2nd Transfer Rollers
Retract Motor (retracted).
Does the above component
operate properly?
Go to step 8. Go to step 7.
7
Check the 2nd transfer roller
contact retract motor assembly
for proper connection.
Is the above component
properly connected?
Replace the 2nd transfer roller
contact retract motor assembly.
Go to “2nd Transfer Roller
Contact Retract Motor
assembly removal” on page.
Replace the connection.
8
Check the media transport/MPF
drive motor assembly for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch MPF feed/lift motor
(pick).
5. Touch MPF feed/lift motor
(feed) Test.
Does the above component
operate properly?
Go to step 10. Go to step 9.
9
Check the media transport/MPF
drive motor assembly for proper
connection.
Is the above component
properly connected?
Replace the media transport/MPF
drive motor assembly.
Go to “Media transport/MPF
drive motor removal” on
page 4-124.
Replace the connection.
Step Action and questions Yes No