Lexmark X95 series - Page 174

2-124 Service Manual
7558-xxx
Go Back
Previous
Next
4
Check the sensor (tray 4 feed
out) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (tray 4 feed
out).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to step 6. Go to step 5.
5
Check the sensor (tray 4 feed
out) for proper connection.
Is the above component
properly connected?
Clean or replace the sensor (tray
4 feed out). Go to “Sensor (tray
module feedout) removal” on
page 4-273.
Replace the connection.
6
Check the tray module feed/lift
motor for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Tray 4 feed/lift motor
(feed).
5. Touch Tray 4 feed/lift motor
(lift).
Does the above component
operate properly?
Go to step 8. Go to step 7.
7
Check the tray feed/lift motor for
proper connection.
Is the above component
properly connected?
Replace the media feed lift motor.
Go to “Media feed lift motor
removal” on page 4-121.
Replace the connections.
Step Action and questions Yes No