Lexmark X95 series - Page 199

Diagnostic information 2-149
7558-xxx
Go Back
Previous
Next
6
Check the sensor (ADF pre
registration) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch ADF/SCANNER
SENSOR TESTS.
4. Touch Sensor (ADF pre
registration).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to step 8. Go to step 7.
7
Check the sensor (ADF pre
registration) for proper
connection.
Is the above component
properly connected?
Replace the sensor (ADF pre
registration). Go to “Sensor
(ADF pre-registration)
removal” on page 4-244.
Replace the connections.
8
Check the ADF feed motor for
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch ADF/SCANNER
MOTOR TESTS.
4. Touch ADF feed motor
(forward).
5. Touch ADF feed motor
(reverse).
Does the above component
operate properly?
Go to step 10. Go to step 9.
9
Check the ADF feed motor for
proper connection.
Is the above component
properly connected?
Replace the ADF feed motor. Go
to “ADF feed motor removal”
on page 4-209.
Replace the connections.
Step Action and questions Yes No