Lexmark X95 series - Page 356

3-18 Service Manual
7558-xxx
Go Back
Previous
Next
OUTPUT BIN TESTS
See “OUTPUT BIN TESTS” on page 3-25.
Feed Tests
See “Feed Tests (Output Bin)” on page 3-25.
Feed To All Bins
See “Feed To All Bins” on page 3-25.
FINISHER TESTS
See “FINISHER TESTS” on page 3-21.
Staple Test
See “Staple Test” on page 3-21.
Hole Punch Test
See “Hole Punch Test” on page 3-21.
Feed Test
See “Feed Test (Finisher)” on page 3-21.
DEVICE TESTS
See “DEVICE TESTS” on page 3-19.
Quick Disk Test
See “Quick Disk Test” on page 3-19.
Disk Test/Clean
See “Disk Test/Clean” on page 3-19.
Flash Test
See “Flash Test” on page 3-19.
PRINTER SETUP
See “PRINTER SETUP” on page 3-26.
Defaults
See “U.S. / Non-U.S. Defaults” on page 3-26.
Prt Color Pg Count
See “Mono and Color Page Count” on page 3-26.
Prt Mono Pg Count
Perm Page Count
See “Permanent Page Count” on page 3-26.
Serial Number
See “Serial Number” on page 3-26.
Model Name
Configuration ID
See “Configuration ID” on page 3-26.
Reset Color Cal
See “Reset Color Calibration” on page 3-26.
Par 1 Strobe Adj
See “Parallel Strobe Adjustment (all parallel ports)” on
page 3-26.
REPORTS
See “REPORTS” on page 3-27.
Menu Settings Page
EVENT LOG
See “EVENT LOG (Diagnostics Menu)” on page 3-20.
Display Log
See “Display the Event Log” on page 3-20.
Print Log
See “Print the Event Log” on page 3-20.
Clear Log
See “Clear the Event Log” on page 3-20.
DEVELOPMENT MENU
Do not use. For development use only.
Debug Port
Print History
SCANNER TESTS
See “SCANNER TESTS” on page 3-27.
ASIC Test
See “ASIC Test” on page 3-27.
Feed Test
See “Feed Test (SCANNER TESTS)” on page 3-27.
Scanner Manual Registration
See “Scanner Manual Registration” on page 3-28.