General information 1-11
7558-xxx
Paper transport
• The paper capacity is 50 sheets.
• Finishing options are not supported in this bin.
• Envelopes are routed here.
• Universal paper is routed here when it is longer than 483 mm (19 in.) or shorter than 148 mm (6 in.).
Finisher standard bin
• The paper capacity is 500 sheets.
• Envelopes and executive-size paper are not supported in this bin.
• Finishing options are not supported in this bin.
Bin 1
• The paper capacity is 3,000 sheets when the standard finisher is installed.
• The paper capacity is 1,500 sheets when the booklet finisher is installed.
Bin 1 finishing features
Size
Punch*
Offset
Single/Double staple
Double dual staple
A3 ✔✔✔✔
A4 ✔✔✔✔
A5 ✘✘✘✘
Executive ✔✔✔ ✘
Folio ✘✔✔✘
JIS B4 ✔✔✔ ✘
JIS B5 ✔✔✔ ✘
Legal ✘✔✔✘
Letter ✔✔✔✔
Statement ✘✘✘✔
Tabloid ✔✔✔ ✘
Universal ✔✔✔✔
Envelopes (any size) ✘✘✘✘
*For the Universal paper size, the finishing edge must be at least 9 in. (229
mm) for a 3-hole punch and 10 in. (254 mm) for a 4-hole punch.
Punch—Selects from two-, three-, or four-hole punch
Single staple—Uses only one staple
Double staple—Uses two staples
Double dual staple—Uses two sets of two staples. This setting is supported
only for widths between 8 in. (203 mm) and 12 in. (297 mm) with lengths
between 7 in. (182 mm) and 17 in. (432 mm).
✔—Supported
✘—Not supported
To Next Page
Loading...
