Lexmark X95 series

To Next Page

To Previous Page

Repair information 4-137

7558-xxx

Go Back

4. Release the two clamps (C) to release the harness.

5. Swing the PCBA door open.

6. Remove the developer HVPS PCBA. See “Developer HVPS PCBA removal” on page 4-75.

7. Remove the two screws (D) securing the PC/developer drive motor cooling fan to the machine.

8. Disconnect the cable (E).

9. Remove the PC/developer drive motor cooling fan.

Lexmark X95 series - Page 615