Repair information 4-469
7558-xxx
2
Adjust the 15 sheet staple position fine adjustment value as
shown in the graphic below:
1. Enter the diagnostic mode.
2. Touch ENGINE ADJUST.
3. Touch Booklet fold adjust.
4. Touch Booklet 15 sheet.
5. Make required staple position adjustments according to
media size.
1 step = .1 mm shift.
6. Touch Submit.
Print a 15 page booklet using the booklet maker.
Does the staple position fine adjustment appear to be offset
from the fold as shown in the graphic below?
Repeat step 2 until
the 15 sheet
staple position fine
adjustment is in
spec.
Problem solved.
Step Check Yes No
To Next Page
Loading...
