MacDon M1240 - Page 503

215916 483 Revision A
Table 6.1 Available Float Spring Kits for Different Header Types and Configurations (continued)
Header Type
Description
Header Configuration
Additional
Float Spring Kits
D140XL
12.2 m (40 ft.)
double reel,
double knife, untimed
Transport
MD #B6047
D140XL
12.2 m (40 ft.)
double reel, double knife,
untimed
Transport, Upper Cross Auger,
Vertical Knives
MD #B6047
D145XL
12.2 m (40 ft.)
double reel,
double knife, untimed
Base
MD #B6047
D145XL
12.2 m (40 ft.)
double reel,
double knife, untimed
Transport
MD #B6047
6.2.3 Double Booster Spring Kit – External
Available for headers over 2812 kg (6200 lb.) to increase the float capacity.
The Double Booster Spring kit (MD #B6106) is used together with the Booster Spring kit (MD # B6047) to add a second
booster spring. For more information, refer to 6.2.2 Booster Spring Kit – External, page 482. Kit instruction MD #147826 is
included in the bundle.
Table 6.2 Available Float Spring Kits for Different Header Types and Configurations
Header Type
Description
Header Configuration
Additional
Float Spring Kits
D145XL
13.7 m (45 ft.)
double reel,
double knife, untimed
Transport
Upper Cross Auger
Vertical Knives
MD #B6106
6.2.4 Double Windrow Attachment
This kit allows auger and rotary headers to lay a double windrow when installed on a windrower. The kit includes a draper
deck, linkage assembly, hydraulics, and installation instructions.
MD #C2070 consists of:
• MD #B6693 – Deck
• MD #B6694 – Mounting frame and hydraulic/electrical connections
• Double Windrow Attachment (DWA) manual
6.2.5 Double Windrow Attachment Shut-Off Kit
The DWA Shut-Off kit is for M1240 Windrowers configured for both rotary disc and draper headers. This kit will enable the
Operator to shut off the DWA draper in order to operate the windrower with a draper header.
MD #299704
Instructions are included in the kit.
OPTIONS AND ATTACHMENTS