ND-70348 (E) CHAPTER 4
Page 413
Revision 3.0
ARTDN
LGRT
1-899
FUNCTION
REMARKS
6
TCL Trunk Class
Specify the kind of trunk
1= DDD Line 2= FX
3= WATS Line
4= Tie Line/Announcement Trunk
5= CCSA 6= Toll Terminal
7= CAS Line 8= Paging
9= Code Call Trunk 10= Dictation Trunk
11= General Paging Trunk
12= Radio Paging Trunk 13-31= Not used
7
L/T Line/Trunk Identification
0= Not used (Line) 1= Trunk
1111This data should always be
assigned as “1”
8
RLP Trunk Release Pattern
0= Calling Party Release (Outgoing only)
1= Not used
2= First Party Release (either station or trunk side)
3= Not used
Normally assign data “2”.
9
TQ Outgoing Trunk Queuing
0= Out of Service 1= In Service
10
SMDR Detailed Billing Information
0= SMDR Out of Service
1= SMDR In Service (ORT required for receiving all dialed digits)
11 TD Toll Denial Battery Reversal 0000Always assign data “0”.
12
DR Distinctive Ringing Pattern
This parameter designates whether distinctive ringing will be provid-
ed for an incoming call.
0=Distinctive Ringing is not required
(ASYD, SYS 3, Index 3, Bit 0=0)
1=Distinctive Ringing is required
(ASYD, SYS 3, Index 3, Bit 0=1)
To Next Page
Loading...
Need help?
General