Figure 27: Mounting bracket release button..............................................................................59
Figure 28: Slide rail release button............................................................................................60
Figure 29: Examples of supported rack holes...........................................................................61
Figure 30: Rails for the DE2-24P Drive Enclosure....................................................................62
Figure 31: Rails for the DE2-24C Drive Enclosure....................................................................63
Figure 32: 10mm wrench and adaptor pins ..............................................................................66
Figure 33: Rack flange, rail flange, and rail label (front)............................................................67
Figure 34: Back-mounting screw...............................................................................................68
Figure 35: Front of the rack and rail-location pegs....................................................................69
Figure 36: A Phillips 13mm head hex flange screw and the front of a rack...............................70
Figure 37: Extended rail to the back of the rack........................................................................70
Figure 38: A Phillips 13mm head hex flange screw and the back of a rack..............................71
Figure 39: Cage nut installed in a square-hole rack..................................................................72
Figure 40: Rail-location pegs from inside of the rail flange and the clip nut..............................73
Figure 41: Rail-location pegs and a square-hole rack...............................................................74
Figure 42: Rail extended to holes in the back of the rack..........................................................74
Figure 43: The locking screws and side of the rail....................................................................75
Figure 44: Left rail channel........................................................................................................76
Figure 45: Back of the Drive Enclosure and Rail secured.........................................................77
Figure 46: Left front-side cap and Phillips 13mm head hex flange screw.................................78
Figure 47: The rail ledge for the DE2-24C Drive Enclosure......................................................79
Figure 48: Phillips Number 2 pan head screw with patch lock..................................................79
Figure 49: Left front-side cap and Phillips 13mm head hex flange screw.................................80
Figure 50: Pilot rail kit parts.......................................................................................................81
Figure 51: Rack-mount installation card template.....................................................................82
Figure 52: Slide rails oriented with the ball bearing track..........................................................83
Figure 53: Slide rail assembly aligned with the rack..................................................................83
Figure 54: Mounting bracket aligned with the
Pilot chassis.......................................................84
List of Figures
12
To Next Page
Loading...
