Oval EL4101 - Density Setup (Mass Conversion Factor) (DENSITY); Density Setup Submenu Screen; ① Density Unit Setup (UNIT)

                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

ＤＥＮＳＩＴＹ        


ＵＮＩＴ               
                 ｋｇ／ｌ

１：ｋｇ／ｍ３            
 ２：ｇ／ｍｌ             
 ３：ｇ／ｌ             
 ４：ｋｇ／ｌ            
                     
                     
                     
−−−−−−＜ＳＥＬＥＣＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜    ｜ＥＮＴＲ
                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

ＤＥＮＳＩＴＹ        

・ＵＮＩＴ               
                 ｋｇ／ｌ
 ・ＤＥＮＳＩＴＹ         
          １．０００００ Ｅ＋０
                     
                     
                     

                     
↓−−−−＜ＳＵＢ  ＭＥＮＵ＞−−−−−
 ＭＡＩＮ｜    ｜    ｜     
 ＭＥＮＵ｜    ｜    ｜ＥＮＴＲ
E-880TM-3-E
100
6.4.19 Density Setup (mass conversion factor) (DENSITY)
Density and (its) density unit are set up here.
※ These settings are used only in Models EL4201 and EL4211. The settinge are not shown in
other models.
（1）Density setup submenu screen
At the submenu, move the cursor to the desired setup item with the up arrow and down arrow keys.
At the touch of (the) function key “ENTR”, the screen switches to the desired item setup screen.
① Density unit setup (UNIT) on p. 100
② Density (DENSITY) on p. 101
To the setup screen pointed by the cursor
SET mode main menu screen ⇒ 6.2 SET mode main menu screen p. 36
ＥＬ４２０１
Unit No. of decimal places
kg/m
3
4
g/ml 6
g/l
4
kg/l 6
Number of decimal places for each unit
① Density unit setup (UNIT)
The measuring unit in density setup is selected here.
Density setup submenu screen p. 100
ＥＬ４２１１
Unit No. of decimal places
kg/m
3
1
g/ml 4
g/l
1
kg/l 4
←Unit option select setup
For details of option setup, see “(2) Option select setup screen (SELECT)” on
page 46.
The unit you can choose from are “kg/m
3
”, “g/ml”, “g/l”, and or “kg/l”.
※ As the measurement unit is changed, the current value (density) is
converted automatically to read in the new measurement unit chosen.
※ The unit to be set here is that of the density displayed in the RUN mode
and of the density setup in the SET mode.