Oval EL4101 - ① Density Calculation - Unit Setup (UNIT)

                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

ＤＥＮＳＩＴＹ ＰＡＲＡＭＥＴＥＲ   


ＵＮＩＴ               
                  ｇ／ｌ

１：ｇ／ｍ３              
 ２：ｋｇ／ｍ３              
 ３：ｋｇ／ｌ             
 ４：ｇ／ｍｌ              
 ５：ｇ／ｌ         
 ６：ｋｇ／ｍｌ          
                     
−−−−−−＜ＳＥＬＥＣＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜    ｜ＥＮＴＲ
E-880TM-3-E
1
Submenu item
SYS mode input type ※ NONE PULSE INPUT
Unit of measurement Displayed Displayed
Constant Displayed Hidden
Under alarm point
Hidden Displayed
Over alarm point
Hidden Displayed
Under fallback level
Hidden Displayed
Over fallback level
Hidden Displayed
Measurement type select
Displayed Displayed
Period time under vacuum T
0
Displayed Displayed
Constant d
0
Displayed Displayed
Constant K
Displayed Displayed
Temperature t
cal
during calibrationl
Displayed Displayed
Temperature coefficient α
Displayed Displayed
Conditions to show submenu items
※：Conditions for selecting on-screen information
① Density calculation - unit setup (UNIT)
Density units are chosen here.
Unit Number of decimal places
g/cm
3
6
kg/m
3
4
kg/l
6
g/ml
6
g/l 4
kg/ml
6
Number of decimal places for each unit
Density calculation submenu screen p. 123
←Unit option select
For details of option setup, see “(2) Option select setup screen (SELECT)” on
page 46.
The unit you can choose from are “g/cm
3
”, “kg/m
3
”, “kg/l”, “g/ml”, “g/l”, and or
“kg/ml”.
※ As the measurement unit is changed, the current value (density) is
converted automatically to read in the new measurement unit chosen.
※ The unit to be set here is that of the uncorrected and corrected density
displayed in the RUN mode and of the density to be set in density
calculation in the SET mode.