Oval EL4101 - ② Temp.;Press. Correction Ref. Pressure Setup (REF. PRESS.)

                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

Ｔ／Ｐ ＣＯＭＰＥＮ．         


ＲＥＦ． ＰＲＥＳＳ．        
         ＋０．０００００ Ｅ＋０
                     
                     
                     
＋０．０００００  
       Ｅ＋０
−−−−−−＜ＩＮＰＵＴＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜ＣＬＥＲ｜ＥＮＴＲ
E-880TM-3-E
8
② Temperature/pressure compensation – reference pressure setup (REF. PRESS.)
The reference pressure of T/P compensation is set up here.
T/P correction submenu screen p. 83
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.
※ For the unit to be set here, the measurement unit set in the pressure input
unit setup (① Pressure input unit setup (UNIT) on page 57) is used. Make
sure of the unit before you set up.