Oval EL4101 - EL4211 Liquid Temp. Compensated Flow Computer (Conversion into Mass); EL4301 Density Computer for Mass Flowmeter

                     
／                    
ＤＥＮＳＩＴＹ           １／２
   ２５７．６２０
                 ｇ／ｍｌ
ＤＥＮＳＩＴＹ（Ｃ）     
  ８００．００００
                 ｇ／ｍｌ
                     
    
                     
                     
 ＭＯＤＥ｜ＥＲＲ．｜ＰＡＧＥ｜     
 ＭＥＮＵ｜ＬＯＧ．｜  ＵＰ｜    
                     
／                    
ＴＥＭＰＥＲＡＴＵＲＥ       ２／２
      ０．００
                   Ｃ 
ＤＥＮＳＩＴＹ ＰＥＲＩＯＤ 
   ９９９９９．９
                   μｓ
％ＭＡＳＳ             ３／３
      ４．７４
                    ％
 ＭＯＤＥ｜ＥＲＲ．｜ＰＡＧＥ｜ＰＡＧＥ 
 ＭＥＮＵ｜ＬＯＧ．｜  ＵＰ｜ＤＯＷＮ
                     
／                    
ＴＯＴＡＬ ＣＯＵＮＴ       １／３
       １２３
                    ｌ
ＴＯＴＡＬ ＣＯＵＮＴ（Ｃ） 
       １２３
                   ｋｇ
                     
    
                     
                     
 ＭＯＤＥ｜ＥＲＲ．｜ＰＡＧＥ｜     
 ＭＥＮＵ｜ＬＯＧ．｜  ＵＰ｜    
                     
／                    
ＦＬＯＷ ＲＡＴＥ         ２／３
         ０
                  ｌ／ｈ
ＦＬＯＷ ＲＡＴＥ（Ｃ）   
         ０
                 ｋｇ／ｈ
ＴＥＭＰＥＲＡＴＵＲＥ
      ０．００
                   Ｃ 
 ＭＯＤＥ｜ＥＲＲ．｜ＰＡＧＥ｜ＰＡＧＥ 
 ＭＥＮＵ｜ＬＯＧ．｜  ＵＰ｜ＤＯＷＮ
                     
／                    
ＭＥＴＥＲ ＥＲＲＯＲ       ３／３
   １．０００００

ＴＥＭＰ． ＣＯＭＰＥＮ．   
   １．０００００
                     
ＤＥＮＳＩＴＹ       
    １０００．０
                 ｋｇ／ｌ
 ＭＯＤＥ｜ＥＲＲ．｜    ｜ＰＡＧＥ 
 ＭＥＮＵ｜ＬＯＧ．｜    ｜ＤＯＷＮ
E-880TM-3-E
30
5.4.6 EL4211 Liquid Temperature Compensated Flow Computer (conversion into mass)
5.4.7 EL4301 Density Computer for Mass Flowmeter
←RUN mode screen 1
Pressing function key “PAGE UP” switches the screen to the next screen.
“TOTAL COUNT”: Uncorrected total flow
“TOTAL COUNT (C)”: Corrected total mass flow
※ Measurement units, exponent, and indicated values vary with actual
settings (SET mode).
←RUN mode screen 2
Pressing function key “PAGE UP” switches the screen to the next screen;
pressing function key “PAGE DOWN” switches the screen to the previous screen.
“FLOW RATE”: Uncorrected instant flowrate
“FLOWRATE (C)”: Corrected instant mass flowrate
“TEMPERATURE”: Temperature
※ The placement of decimal point in temperature reading varies with the
measurement unit selected. (For the decimal point of temperature, see
“① Temperature input unit setup (UNIT)” on page 51.)
←RUN mode screen 3
Pressing function key ”PAGE DOWN” switches the screen to the previous
screen.
“METER ERROR”: Meter error correction factor
“TEMP. COMPEN.”: Temperature correction factor
“DENSITY”: Density
※ The placement of decimal point in density reading varies with the
measurement unit selected. (For the decimal point of density, see
“① Density unit setup (UNIT)” on page 100.)
←RUN mode screen 2
Pressing function key “PAGE UP” switches the screen to the next screen;
pressing function key “PAGE DOWN” switches the screen to the previous screen.
“TEMPERATURE”: Temperature
“DENSITY PERIOD”: Density period
“%MASS”: Solids content weight concentration
※ The placement of decimal point in temperature or density period reading
varies with the measurement unit selected. (For the decimal point of
temperature, see “① Temperature input unit setup (UNIT)” on page 51.
For the decimal point of density period, see “① Density pulse input unit
setup (UNIT)” on page 72.)
←RUN mode screen 1
Pressing function key “PAGE UP” switches the screen to the next screen.
“DENSITY”: Density
“DENSITY (C)”: Density (corrected)
※ Measurement units, exponent, and indicated values vary with actual
settings (SET mode).
※ The placement of decimal point in uncorrected and corrected density
readings varies with the measurement units selected. (For the decimal
point of uncorrected and corrected density, see “① Density calculation
unit setup (UNIT)” on page 105.)