/
−−−−−<SET MODE>−−−−−−
QUADRATIC COMPEN.
COEFFICIENT(Tb)
+1.00000 E+0
+0.00000
E+0
−−−−−−−<INPUT>−−−−−−−
|CAN−| |
EXIT| CEL|CLER|ENTR
/
−−−−−<SET MODE>−−−−−−
QUADRATIC COMPEN.
COEFFICIENT(Ta)
+1.00000 E+0
+1.00000
E+0
−−−−−−−<INPUT>−−−−−−−
|CAN−| |
EXIT| CEL|CLER|ENTR
/
−−−−−<SET MODE>−−−−−−
QUADRATIC COMPEN.
COEFFICIENT(Tc)
+1.00000 E+0
+1.00000
E+0
−−−−−−−<INPUT>−−−−−−−
|CAN−| |
EXIT| CEL|CLER|ENTR
E-880TM-3-E
0
④ Quadratic correction - coefficient Ta setup (COEFFICIENT (Ta))
Quadratic correction coefficient Ta is set up here.
※ The temperature unit for this coefficient is “°C”.
Quadratic correction submenu screen p. 88
⑤ Quadratic correction - coefficient Tb setup (COEFFICIENT (Tb))
Quadratic correction coefficient Tb is set up here.
※ The temperature unit for this coefficient is “°C”.
Quadratic correction submenu screen p. 88
⑥ Quadratic correction - coefficient Tc setup (COEFFICIENT (Tc))
Quadratic correction coefficient Tc is set up here.
※ The temperature unit for this coefficient is “°C”.
Quadratic correction submenu screen p. 88
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.