Oval EL4101 - ⑧ Density Calculation - Period (Time) under Vacuum (CONSTANT To); ⑨ Density Calculation - Constant Do (CONSTANT Do); ⑩ Density Calculation - Constant K (CONSTANT K)

                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

ＤＥＮＳＩＴＹ ＰＡＲＡＭＥＴＥＲ   


ＣＯＮＳＴＡＮＴ Ｔｏ        
         ＋３．５００００ Ｅ＋２
                     
                     
                     
＋３．５００００  
       Ｅ＋２
−−−−−−−＜ＩＮＰＵＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜ＣＬＥＲ｜ＥＮＴＲ
                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

ＤＥＮＳＩＴＹ ＰＡＲＡＭＥＴＥＲ   


ＣＯＮＳＴＡＮＴ Ｋ         
         ＋１．０００００ Ｅ＋０
                     
                     
                     
＋１．０００００  
       Ｅ＋０
−−−−−−−＜ＩＮＰＵＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜ＣＬＥＲ｜ＥＮＴＲ 
                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

ＤＥＮＳＩＴＹ ＰＡＲＡＭＥＴＥＲ   


ＣＯＮＳＴＡＮＴ ｄｏ        
         ＋７．０００００ Ｅ＋１
                     
                     
                     
＋７．０００００  
       Ｅ＋１
−−−−−−−＜ＩＮＰＵＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜ＣＬＥＲ｜ＥＮＴＲ 
E-880TM-3-E
18
⑧ Density calculation - period time under vacuum (CONSTANT T
O
)
The density period under vacuum for density calculation is set up here.
Density calculation submenu screen p. 123
⑨ Density calculation - constant d
O
(CONSTANT d
O
)
Constant d
o
for density calculation is set up here.
Density calculation submenu screen p. 123
⑩ Density calculation - constant K (CONSTANT K)
Constant K for density calculation is set up here.
Density calculation submenu screen p. 123
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.
※ For the unit to be set here, the unit set at the density pulse input setup (①
Density pulse input unit setup (UNIT) on page 72) is used. Make sure of
the unit before you set up.
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.
※ For the unit to be set here, the unit set at the density unit setup menu is
used. Make sure of the unit before you set up.
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.