Oval EL4101 - ④ 3Α Correction Ref. Temperature Setup (REF. TEMP.)

                     
／                    
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

３α ＣＯＭＰＥＮ．         


ＲＥＦ． ＴＥＭＰ．         
         ＋１．５００００ Ｅ＋１
                     
                     
                     
＋１．５００００  
       Ｅ＋１
−−−−−−−＜ＩＮＰＵＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜ＣＬＥＲ｜ＥＮＴＲ
E-880TM-3-E
8
④ 3α compensation – reference temperature setup (REF. TEMP.)
The reference temperature of 3α compensation is set up here.
3 α correction submenu screen p. 80
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.
※ For the unit to be set here, the measurement unit set in the temperature
input unit setup (① Temperature input unit setup (UNIT) on page 51) is
used. Make sure of the unit before you set up.