Oval EL4101 - ② Liquid a (B) - Density Unit Setup (UNIT); ③ Liquid a (B) - Density Setup (DENSITY)

                     
                     
−−−−−＜ＳＥＴ ＭＯＤＥ＞−−−−−−

＊ＦＬＵＩＤ Ａ          


ＤＥＮＳＩＴＹ            
          ＋１．５００００Ｅ＋１
                     
                     
                     
＋１．５００００  
       Ｅ＋１
−−−−−−−＜ＩＮＰＵＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜ＣＬＥＲ｜ＥＮＴＲ 
                     
                     
−−−−−＜ＰＡＲＡ ＳＥＴ＞−−−−−−

＊ＦＬＵＩＤ Ａ            


ＵＮＩＴ               
                Ｋｇ／ｍ３
 １：Ｋｇ／ｍ３        

２：ｇ／ｍｌ            
 ３：ｇ／ｌ                   
 ４：Ｋｇ／ｍｌ                 
 ５：Ｋｇ／ｌ                  
 ６：ｇ／ｃｍ３            
                     
−−−−−−＜ＳＥＬＥＣＴ＞−−−−−−−
     ｜ＣＡＮ−｜    ｜     
 ＥＸＩＴ｜ ＣＥＬ｜    ｜ＥＮＴＲ 
E-880TM-3-E
1
Liquid A (B) setup submenu screen p. 173
② Liquid A (B) - density unit setup (UNIT)
Density unit is set up here.
Liquid A (B) setup submenu screen p. 173
③ Liquid A (B) - density setup (DENSITY)
Density is set up here.
←Numerical value input setup
For details of numerical value input setup, see “(1) Numerical value setup screen
(INPUT)” on page 43.
※ For the unit to be set up here, the unit set up at the density parameter unit
setup (② Liquid A (B) density unit setup (UNIT) on page 174) is used.
Make sure of the unit before you set up.
←Unit option select
For details of option selection, see “(2) Option select setup screen (SELECT)” on
page 46.
Avaialble liquid kinds are “kg/m
3
”, “g/ml”, “g/l”, “kg/ml”, “kg/l” and “g/cm
3
”.