/
−−−−−<SET MODE>−−−−−−
DENSITY PARAMETER
・UNIT
g/l
・CONSTANT
+1.00000 E+0
・REF. TEMP.
+1.50000 E+1
・THERMAL EXPAN.(β)
+2.40000 E−4
−−−−−<SUB MENU>−−−−−
MAIN| | |
MENU| | |ENTR
/
↑−−−−<SET MODE>−−−−−−
DENSITY PARAMETER
・COEFFCIENT α
+4.44000 E−4
・THERMAL EXPAN.(β)
+2.40000 E−4
−−−−−<SUB MENU>−−−−−
MAIN| | |
MENU| | |ENTR
/
↑−−−−<SET MODE>−−−−−−
DENSITY PARAMETER
・AIR PERIOD
+8.85680 E+3
・WATER DENS.
+9.98100 E+2
・WATER TEMP.
+1.80000 E+1
・WATER PERIOD
+1.32346 E+4
↓−−−−<SUB MENU>−−−−−
MAIN| | |
MENU| | |ENTR
E-880TM-3-E
113
To the setup screen pointed by the cursor
SET mode main menu screen ⇒ 6.2 SET mode main menu screen p. 36
⑩ Density calculation - density period with air (AIR PEIOD) p. 117
⑪ Density calculation - density with water (WATER DENS.) p. 117
⑫ Density calculation - water temp. during calibration (WATER TEMP.) p. 118
⑬ Density calculation - density period with water (WATER PERIOD) p. 118
To the setup screen pointed by the cursor
SET mode main menu screen ⇒ 6.2 SET mode main menu screen p. 36
⑭ Density calculation - temp. compensate. coeff. of tube spring const.
(AIR TEMP.) p. 118
⑮ Density calculation -reference temperature conversion factor of density
(THERMAL EXPAN. (β)) p. 119
To the setup screen pointed by the cursor
SET mode main menu screen ⇒ 6.2 SET mode main menu screen p. 36
① Density calculation - unit setup (UNIT) p. 114
② Density calculation - constant (CONSTNAT) p. 114
⑦ Density calculation - reference temperature setup (REF. TEMP.) p. 116
⑮ Density calculation - reference temperature conversion factor of density
(THERMAL EXPAN. (β)) on page 119
② Constants are selected