Rohde & Schwarz R&S SMW200A - Page 1045

Remote Control Commands
R&S
®
SMW200A
1045User Manual 1175.6632.02 ─ 30
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:COMMent <Comment>
Enters a comment for the selected configuration file.
Parameters:
<Comment> string
Example: See Example "Creating a multi-segment waveform"
on page 1022
Manual operation: See "Comment" on page 360
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:DELete <Filename>
Deletes the selected configuration file.
Setting parameters:
<Filename> string
Example: See Example "Creating a multi-segment waveform"
on page 1022.
Usage: Setting only
Manual operation: See "Append/Delete/Shift Seg. Up/Down" on page 362
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:OFILe <OFile>
Defines the file name of the output multi-segment waveform.
Parameters:
<OFile> string
Example: See Example "Creating a multi-segment waveform"
on page 1022
Manual operation: See "Save List/Save List As..." on page 360
See "Output file" on page 360
See "Create/Create and Load" on page 360
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend
<Waveform>
Appends the specified waveform to the configuration file.
Setting parameters:
<Waveform> string
Example: see Example "Creating a multi-segment waveform"
on page 1022
Usage: Setting only
Manual operation: See "Append/Delete/Shift Seg. Up/Down" on page 362
SOURce Subsystem