Rohde & Schwarz R&S SMW200A - Page 146

Signal Routing and System Configuration
R&S
®
SMW200A
146User Manual 1175.6632.02 ─ 30
Execute "Apply" to confirm the settings.
Remote command:
:SCONfiguration:EXTernal:REMote:LIST? on page 930
:SCONfiguration:EXTernal:REMote:ADD on page 930
:SCONfiguration:EXTernal:CODer<ch>:REMote:ISELect on page 931
:SCONfiguration:EXTernal:FADer<ch>:REMote:ISELect on page 931
:SCONfiguration:EXTernal:BBMM<ch>:REMote:ISELect on page 931
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:ISELect on page 931
:SCONfiguration:EXTernal:RF<ch>:REMote:ISELect on page 931
Set Symbolic Name
Sets the alias name of the instrument.
Remote command:
:SCONfiguration:EXTernal:REMote:ADD on page 930
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:FADer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:RF<ch>:REMote:INFO? on page 932
Remote Channel
Selects the hardware channel (USB or LAN) used by the remote channel to the exter-
nal instrument.
Remote command:
:SCONfiguration:EXTernal:REMote:ADD on page 930
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:FADer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:RF<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:RF<ch>:REMote:INFO? on page 932
Hostname or IP Address
Displays/sets the hostname or IP address of the connected external instrument.
Remote command:
:SCONfiguration:EXTernal:REMote:ADD on page 930
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:FADer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INFO? on page 932
:SCONfiguration:EXTernal:RF<ch>:REMote:INFO? on page 932
Device ID
Sets/displays the device identifier, that is a unique string with the following structure:
<product name>-<serial number>
For a defined "External Instrument", the information is read out automatically.
System Configuration Settings