Rohde & Schwarz R&S SMW200A - Page 580

Configuring the RF Signal
R&S
®
SMW200A
580User Manual 1175.6632.02 ─ 30
2. Select "Import/Export".
Figure 8-22: Im-/Export dialog (example with UCOR settings)
The "Import/Export" dialog contains all functions and settings to import externally
created list data or to export it accordingly. You can process and store a list in the
formats *.txt (ASCII), or *.csv (plain text with identical sequence of fields). The
table separators and the decimal floating point numbers are customizable.
Settings
Mode........................................................................................................................... 580
ASCII File Settings......................................................................................................580
Select (ASCII) Source/Select (ASCII) Destination...................................................... 581
Select Source/Select ASCII Destination..................................................................... 581
Import / Export.............................................................................................................581
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 1179
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 1121
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
"Decimal
Point"
Sets "Point" (dot) or "Comma" as the decimal separator used in the
ASCII data with floating-point numerals.
"Column Separator"
Sets the separator between the columns in an ASCII table.
Available are: "Tab", "Semicolon", "Comma" or "Space".
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension on page 1178
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal on page 1178
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn on page 1178
Improving Level Performance