File and Data Management
R&S
®
SMW200A
682User Manual 1175.6632.02 ─ 30
Exclude Frequency..................................................................................................... 683
Exclude Level..............................................................................................................683
Recall.......................................................................................................................... 683
Recall Immediate x......................................................................................................683
File Manager............................................................................................................... 684
Operation Mode
Accesses the settings for storing ("Save") and loading ("Recall") of the instrument set-
tings. Also, you can import SCPI-Files ("SCPI-Import") or export SCPI files ("SCPI-
Export").
See Chapter 11.6, "Exporting and Importing Remote Command Lists", on page 689.
Directory, File List and Filename
Note:
You access this generic standard function each time you perform one of the following:
●
Save or load (settings) files
●
Define a folder in that these files are saved
●
Navigate through the file system.
The dialog name changes depending on the context. The provided functions are self-
explanatory and similar.
Use the settings for example as follows:
●
To navigate through the file system, use the directory tree.
●
To create a file, load and save files, use the dedicated functions "New", "Select",
Save, and Recent files.
●
To access the general data list editor, use the"Edit" button
(see also Chapter 8.7.7, "List Editor", on page 524).
●
To perform standard file management functions, like create directories, move, copy,
delete files and/or directories, use the standard "File Manager" function (see Chap-
ter 11.8, "Using the File Manager", on page 690).
Remote command:
To list all files in a directory:
:MMEMory:CDIRectory on page 857
:MMEMory:CATalog? on page 856
Refer to the description of firmware options for the syntax of the corresponding SCPI
command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog? on page 1119
To list files with user data:
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 1012
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 1012
Recent files
Displays the files last used.
Show SCPI List
Opens the "SCPI List", which lists the current settings of the R&S SMW as SCPI com-
mands.
The R&S SMW provides this function for Operation Mode > SCPI-Export.
Saving and Recalling Instrument Settings
To Next Page
Loading...