General Instrument Functions
R&S
®
SMW200A
737User Manual 1175.6632.02 ─ 30
See also the application sheet RS_SMW_FastDataAlignment_AppSheet, available for
download at www.rohde-schwarz.com/manual/smw200a.
The remote commands required to define these settings are described in Chap-
ter 14.12, "DISPlay Subsystem", on page 874.
Name
Enters a user-defined name for the action.
Wizard
Defines the action to be executed.
"Load SCPI Script"
Selecting the action load and executes the SCPI script.
"Recall Setup"
Load a setup for quick access to the user-defined settings.
"Open Dialog, with Position and Size/append to SCPI"
Quick access to the selected dialog.
Use the "Open Dialog, append to SCPI" function to define a
sequence of several dialogs to be opened simultaneously or one after
the other.
Tip: Use the command :SYSTem:WAIT to add a delay between the
subsequent commands.
Select
Depending on the selected "Wizard", provides access to:
●
The standard "File Select" function for loading of an SCPI script or setup file
●
A list of the dialog IDs of all currently opened dialogs. The dialog ID is used for dia-
log identification in the remote control.
See SCPI.
SCPI
For the currently selected action, displays the corresponding SCPI command with the
associated parameter for dialog identification (dialog ID). The automatically displayed
SCPIs are enabled for subsequent modification.
Remote command:
:DISPlay:DIALog:OPEN on page 877
See also :DISPlay:DIALog:ID? on page 876
Add, Change, Remove
Standard functions for managing of the actions.
Back to Execute Mode
Opens the "Select Action to Execute" dialog. Select an Action form the list to execute
it.
To return to the "Define User Key Actions" dialogs, select Select Action to Execute >
Define Actions.
Organizing Frequently Used Settings as Favorites
To Next Page
Loading...