Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
710User Manual 1335.9090.02 ─ 09
BUS<b>:ARINc:WORD<n>:STATus?
Returns the overall state of the specified word.
Suffix:
<b>
.
1..4
Return values:
<WordStatus> OK | INSufficient | INComplete | PRERror | GERRor | CERRor
PRERror: parity error occured.
GERRor: timing gap error occured.
CERRor: coding error occured.
Usage: Query only
BUS<b>:ARINc:WORD<n>:STOP?
Returns the end time of the specified word.
Suffix:
<b>
.
1..4
Return values:
<StopTime>
Usage: Query only
17.11.9.4 ARINC 429 search
SEARch:PROTocol:ARINc:CONDition..............................................................................710
SEARch:PROTocol:ARINc:DATA:CONDition..................................................................... 711
SEARch:PROTocol:ARINc:DATA:MAXimum......................................................................711
SEARch:PROTocol:ARINc:DATA:MINimum...................................................................... 712
SEARch:PROTocol:ARINc:DATA:OFFSet......................................................................... 712
SEARch:PROTocol:ARINc:DATA:SIZE............................................................................. 712
SEARch:PROTocol:ARINc:ERRor....................................................................................712
SEARch:PROTocol:ARINc:FORMat................................................................................. 712
SEARch:PROTocol:ARINc:LABel:CONDition.................................................................... 713
SEARch:PROTocol:ARINc:LABel:MAXimum.....................................................................713
SEARch:PROTocol:ARINc:LABel:MINimum......................................................................713
SEARch:PROTocol:ARINc:SDI........................................................................................713
SEARch:PROTocol:ARINc:SSM...................................................................................... 713
SEARch:PROTocol:ARINc:WORD[:TYPE]........................................................................714
SEARch:PROTocol:ARINc:CONDition
Sets the event or combination of events to be searched for. Depending on the selected
event, further settings are required.
Parameters:
<SearchCondition> WORD | ERRor | LABel | LDATa
Serial bus analysis