Rohde & Schwarz RTP044 - Page 1026

Jitter analysis and clock data recovery
R&S
®
RTP
1026User Manual 1337.9952.02 ─ 12
Serial
standard
Nom. bit
rate
Bandwidth Rel. bandwidth Order Damping
Fibre
Channel 2x
2 Gbps 1667 1.2 MHz 1st -
Fibre
Channel 4x
4 Gbps 1667 2.4 MHz 1st -
Fibre
Channel 8x
8 Gbps 1667 4.8 MHz 1st -
Fibre
Channel
16x
14.025
Gbps
1667 8.41 MHz 1st -
HDMI 1.2 1.32 Gbps 1667 791.84 kHz 1st -
HDMI 1.4 3.4 Gbps 1667 2.04 MHz 1st -
HDMI 2.0 4.8 Gbps 1667 2.88 MHz 1st -
PCIe Gen
1
2.5 Gbps 1667 1.5 MHz 2nd 0.7
PCIe Gen
2
5 Gbps 1000 5 MHz 2nd 0.7
PCIe Gen
3
8 Gbps 500 16 MHz 2nd 0.7
PCIe Gen
4
16 Gbps 500 32 MHz 2nd 0.7
SATA Gen
1 (1/500)
1.5 Gbps 500 3 MHz 2nd 0.7
SATA Gen
1 (1/1667)
1.5 Gbps 1667 899.82 kHz 2nd 0.7
SATA Gen
1
1.5 Gbps 1667 899.82 kHz 2nd 0.7
SATA Gen
2 (1/500)
3 Gbps 500 6 MHz 2nd 0.7
SATA Gen
2 (1/1667)
3 Gbps 1667 1.8 MHz 2nd 0.7
SATA Gen
2
3 Gbps 1667 1.8 MHz 2nd 0.7
SATA Gen
3 (1/500)
6 Gbps 500 12 MHz 2nd 0.7
SATA Gen
3 (1/1667)
6 Gbps 1667 3.6 MHz 2nd 0.7
SATA Gen
3
6 Gbps 1667 3.6 MHz 2nd 0.7
SAS Gen 1 3 Gbps 1667 1.8 MHz 1st -
SAS Gen 2 6 Gbps 1667 3.6 MHz 1st -
SAS Gen 3 12 Gbps 1667 7.20 MHz 1st -
Advanced jitter and noise (option R&S RTP- K133/K134)