Rohde & Schwarz RTP044 - Page 1160

Remote control commands
R&S
®
RTP
1160User Manual 1337.9952.02 ─ 12
22.7.2.2 Color tables
DISPlay:COLor:PALette:ADD........................................................................................ 1160
DISPlay:COLor:PALette:REMove...................................................................................1160
DISPlay:COLor:PALette:COUNt?................................................................................... 1160
DISPlay:COLor:PALette:POINt:ADD...............................................................................1160
DISPlay:COLor:PALette:POINt:INSert............................................................................ 1160
DISPlay:COLor:PALette:POINt:REMove......................................................................... 1161
DISPlay:COLor:PALette:POINt[:VALue].......................................................................... 1161
DISPlay:COLor:PALette:POINt:COUNt?......................................................................... 1161
DISPlay:COLor:PALette:ADD <Name>
Adds a new color table with the specified name.
Setting parameters:
<Name> color table
Usage: Setting only
DISPlay:COLor:PALette:REMove <Name>
Removes the specified color table.
Setting parameters:
<Name> color table
Usage: Setting only
DISPlay:COLor:PALette:COUNt?
Queries the number of configured color maps.
Usage:
Query only
DISPlay:COLor:PALette:POINt:ADD <PaletteName>
Appends a new row at the end of the color table.
Setting parameters:
<PaletteName> color table
Usage: Setting only
DISPlay:COLor:PALette:POINt:INSert <PaletteName>, <PointIndex>
Inserts the entry at the specified index in the color table.
Setting parameters:
<PaletteName> color table
<PointIndex> row number in the color table
Instrument setup