Rohde & Schwarz RTP044 - Page 1207

Remote control commands
R&S
®
RTP
1207User Manual 1337.9952.02 ─ 12
TRPRobe:SETup:TYPE?
PROBe<m>:SETup:TYPE?
Queries the type of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<Type> String containing one of the following values:
– None (no probe detected)
– Passive Probe
– active single-ended
Usage: Query only
Asynchronous command
TRPRobe:SETup:NAME?
PROBe<m>:SETup:NAME?
Queries the name of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<Name> Name string
Usage: Query only
Asynchronous command
TRPRobe:SETup:BANDwidth?
PROBe<m>:SETup:BANDwidth?
Queries the bandwidth of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<Bandwidth> Range: 10000 to 20E+9
*RST: 1E+9
Default unit: Hz
Usage: Query only
Asynchronous command
TRPRobe:SETup:ATTenuation[:AUTO]?
PROBe<m>:SETup:ATTenuation[:AUTO]?
Queries the attenuation of the probe.
Acquisition and setup