Rohde & Schwarz RTP044 - Page 1227

Remote control commands
R&S
®
RTP
1227User Manual 1337.9952.02 ─ 12
TRPRobe:ID:PARTnumber?..........................................................................................1227
PROBe<m>:ID:PARTnumber?.......................................................................................1227
TRPRobe:ID:SRNumber?............................................................................................. 1228
PROBe<m>:ID:SRNumber?..........................................................................................1228
TRPRobe:SETup:CAPacitance?....................................................................................1228
PROBe<m>:SETup:CAPacitance?.................................................................................1228
TRPRobe:SETup:IMPedance?...................................................................................... 1228
PROBe<m>:SETup:IMPedance?................................................................................... 1228
TRPRobe:ID:SWVersion?
PROBe<m>:ID:SWVersion?
Queries the version of the probe firmware.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<Softwareversion> Version number in a string.
Usage: Query only
Asynchronous command
TRPRobe:ID:PRDate?
PROBe<m>:ID:PRDate?
Queries the production date of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<ProductionDate> Date in a string.
Usage: Query only
Asynchronous command
TRPRobe:ID:PARTnumber?
PROBe<m>:ID:PARTnumber?
Queries the R&S part number of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<PartNumber> Part number in a string.
Usage: Query only
Asynchronous command
Acquisition and setup