Rohde & Schwarz RTP044 - Page 1540

Remote control commands
R&S
®
RTP
1540User Manual 1337.9952.02 ─ 12
MMEM
Directs the display image to a file. The MMEMory:NAME com-
mand defines the file name. The file format is defined with
HCOPy:DEVice<m>:LANGuage.
SYST:COMM:CLIP
Directs the hardcopy to the clipboard.
*RST: SYST:COMM:CLIP
Example:
HCOP:DEST 'MMEM'
See also Chapter 22.3.5.1, "Saving a screenshot to file",
on page 1133
MMEMory:NAME <FileName>
Defines the file name when an image of the display is stored to a file.
Setting parameters:
<FileName> String parameter specifiying path and file name of the screen-
shot.
Example: See Chapter 22.3.5.1, "Saving a screenshot to file",
on page 1133
Usage: Setting only
SCPI confirmed
HCOPy:DEVice<m>:LANGuage <FileFormat>
Defines the file format for output of the display image to file.
To set the output to file, use HCOPy:DESTination<1..2> with parameter 'MMEM'.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<FileFormat> PNG | JPG | BMP | TIFF | PDF
*RST: PNG
Example: See Chapter 22.3.5.1, "Saving a screenshot to file",
on page 1133
HCOPy:DEVice<m>:INVerse <InverseColor>
Inverts the colors of the output, i.e. a dark waveform is printed on a white background.
See also:
●
HCOPy:WBKG on page 1541
●
"White background" on page 504
Data management