Rohde & Schwarz RTP044 - Page 1777

Remote control commands
R&S
®
RTP
1777User Manual 1337.9952.02 ─ 12
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:HBTO:FRAMe<m>:STOP? <SearchName>
Returns the end time of the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:HBTO:FRAMe<m>:DESTaddress? <SearchName>
Returns the destination address of the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<DestAddress>
Usage: Query only
SEARch:RESult:HBTO:FRAMe<m>:SRCaddress? <SearchName>
Returns the source address of the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<SourceAddress>
Usage: Query only
Protocols