Rohde & Schwarz RTP044 - Page 2045

Remote control commands
R&S
®
RTP
2045User Manual 1337.9952.02 ─ 12
BUS<m>:USBThree:THRHigh <ThresholdUpper>
Defines the upper threshold level for digitization of the data signal in the USB 3.1 pro-
tocol.
Suffix:
<m>
.
1..4
Parameters:
<ThresholdUpper> Range: -2 to 2
Increment: 0.01
*RST: 0.05
Default unit: V
BUS<m>:USBThree:THRLow <ThresholdLower>
Defines the lower threshold level for digitization of the data signal in the USB 3.1 proto-
col.
Suffix:
<m>
.
1..4
Parameters:
<ThresholdLower> Range: -2 to 2
Increment: 0.01
*RST: -0.05
Default unit: V
BUS<m>:USBThree:SCRMode <ScrambleMode>
Selects if the data pattern is scrambled or unscambled.
Suffix:
<m>
.
1..4
Parameters:
<ScrambleMode> SCRM | NSCR
SCRM
Scrambling is enabled as specified in the standard, to minimize
EMI emissions.
NSCR
No scrambling: To simplify testing and debugging, scrambling is
disabled.
*RST: SCRM
BUS<m>:USBThree:TYPE <Protocol>
Selects the USB 3.1 protocol type.
Suffix:
<m>
.
1..4
Protocols