Rohde & Schwarz RTP044 - Page 2048

Remote control commands
R&S
®
RTP
2048User Manual 1337.9952.02 ─ 12
Parameters:
<DFEcoeff> Range: -1 to 1
Increment: 1E-3
*RST: 0
Default unit: V
BUS<m>:USBThree:DFE:ENBLe <EnableDFE>
Enables the use of the decision feedback equalization for USB 3.1.
Suffix:
<m>
.
1..4
Parameters:
<EnableDFE> ON | OFF
*RST: ON
BUS<m>:USBThree:DFE:ESTCoeff <AutoChEstimate>
Enables the use of estimate coefficients for the decision feedback equalization.
Suffix:
<m>
.
1..4
Parameters:
<AutoChEstimate> ON | OFF
*RST: ON
BUS<m>:USBThree:DFE:TCONt <CIRLength>
Sets a number of taps for the decision feedback filter.
Suffix:
<m>
.
1..4
Parameters:
<CIRLength> Range: 1 to 20
Increment: 1
*RST: 5
BUS<m>:USBThree:PROTocol <ProtHSSPTSt>
Selects the USB Super Speed channel length.
Suffix:
<m>
.
1..4
Parameters:
<ProtHSSPTSt> OFF | LOWFLTR | HIGHFLTR
*RST: LOWFLTR
Protocols