Rohde & Schwarz RTP044 - Page 2195

Remote control commands
R&S
®
RTP
2195User Manual 1337.9952.02 ─ 12
Results of mask tests on eye diagrams
If option R&S RTP-K91 is installed, you can perform mask tests on eye diagrams E1 to
E4.
MTESt:RESult:COUNt:SLICes?.....................................................................................2195
MTESt:RESult:COUNt:FSLices?....................................................................................2195
MTESt:RESult:VIOLation<m>:COUNt?.......................................................................... 2195
MTESt:RESult:VIOLation<m>[:SLICe]?.......................................................................... 2196
MTESt:RESult:VIOLation<m>:STARt?............................................................................2196
MTESt:RESult:VIOLation<m>:STOP?............................................................................ 2196
MTESt:RESult:COUNt:SLICes? <MaskTestName>
Returns the number of slices that contributed to the eye diagram.
Query parameters:
<MaskTestName> String parameter
Return values:
<SlicesCompleted> Range: 0 to 100E+24
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
MTESt:RESult:COUNt:FSLices? <MaskTestName>
Returns the number of slices that violated the mask.
Query parameters:
<MaskTestName> String parameter
Return values:
<SliceHits> Range: 0 to 100E+24
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
MTESt:RESult:VIOLation<m>:COUNt? <MaskTestName>
Suffix:
<m>
.
*
Violation index, corresponds to the number in the "Violation" col-
umn of mask test result.
Query parameters:
<MaskTestName>
Return values:
<Count>
Protocols