Search functions
R&S
®
RTP
459User Manual 1337.9952.02 ─ 12
Polarity, Range, Slew rate, ±Delta
●
"Slope" on page 217
●
"Range" on page 227
●
"Slew rate" on page 227
●
"±Delta" on page 227
Remote command:
SEARch:TRIGger:SLEWrate:SLOPe on page 1491
SEARch:TRIGger:SLEWrate:RANGe on page 1491
SEARch:TRIGger:SLEWrate:TIME on page 1492
SEARch:TRIGger:SLEWrate:DELTa on page 1490
Upper level, Lower level
Set the upper and lower voltage thresholds. When the signal crosses a level, the slew
rate measurement starts or stops depending on the selected slope.
Remote command:
SEARch:TRIGger:LEVel:TRANsition:UPPer on page 1492
SEARch:TRIGger:LEVel:TRANsition:LOWer on page 1492
11.2.2.9 Setup & Hold
The Setup & Hold search settings are the same as the Setup & Hold trigger settings.
To apply the trigger settings to search, tap Copy from trigger A'.
Search setup
To Next Page
Loading...
