Data and file management
R&S
®
RTP
479User Manual 1337.9952.02 ─ 12
To save settings to a saveset file
Alternatively, you can add the " Save settings" icon to the toolbar and use the icon to
store the saveset file to the folder and file specified in the "Settings" tab.
See also Chapter 3.3.6.2, "Configuring the toolbar", on page 74.
1. Tap "Menu" and select "Save/Recall".
2. In the "Save" tab, press the "Saveset" button .
3. Tap "Save" to save the settings to the specified file.
Tap "Save As" to save the settings to a different file. Select the file and directory
from the file selection dialog box.
The current settings are saved to the selected file.
To load settings from a saveset file
Alternatively, you can use the "Graphical Saveset" function on the toolbar.
1. Tap "Menu" and select "Save/Recall".
2. Select the "Recall" tab.
3. Press the "Saveset" button.
4. Tap "Load" to load the settings from the specified file.
Tap "Open" to navigate to a different file. Select the file from the file selection dialog
box and tap "Select".
The saved settings are loaded to the R&S RTP.
To save a One File
1. If you want to save reference waveforms in the One File, create and display the
reference waveforms.
2. Tap "Menu" and select "Save/Recall".
3. In the "Save" tab, tap the "One File".
4. Tap "Save" to save the settings to the specified file.
Tap "Save As" to save the settings to a different file. Select the file and directory
from the file selection dialog box.
The current settings and the active reference waveforms are saved to the selected
file.
To load a One File
1. Tap "Menu" and select "Save/Recall".
2. Press the "One File" button.
3. Tap "Load" to load the settings from the specified file.
Save and recall user settings
To Next Page
Loading...
