Protocol analysis
R&S
®
RTP
532User Manual 1337.9952.02 ─ 12
Decode Results Table
The results are shown in two tables:
●
"Decode results": contains information about all decoded frames
●
"Details frame": contains more detailed information about the selected frame in the
"Decode results" table.
Table 13-2: Content of the Details frame table
Column Description
State Overall state of the frame.
"Insuffcient waveform length" indicates that the
frame is not completely contained in the acquisition.
Change the horizontal scale, or move the reference
point to the left to get a longer acquisition.
Frame start Time of frame start
Address type Address length, 7 bit or 10 bit
Address value (hex) Hexadecimal value of the address
Label Symbolic label name defined in the label list
R/W bit Value of the R/W bit
Bit rate Value of the bit rate
Table 13-3: Content of the Decode results table
Column Description
Formatted Value of all data bytes of the frame
Ack bit start Start time of the acknowledge bit
Ack bit Value of the address acknowledge bit
Tools
Press "Display settings" in the "Deode Reults" table, to access the "Display" tab.
Remote commands
Remote commands are described in Chapter 22.17.3.3, "Decode results",
on page 1562.
I²C (option R&S
RTP-K1)
To Next Page
Loading...
