Protocol analysis
R&S
®
RTP
625User Manual 1337.9952.02 ─ 12
Type
The search criterion is defined by "Type". All trigger types are also available for search.
Additional search parameters are provided under "Detailed Search Parameter Setup".
"Word Start"
Searches for the start word.
"Word Stop"
Searches for the stop word.
"Label + Data"
Searches for a defined word format. You can search for the label, the
data, the SDI, and SSM bits separately.
For details, see "Label + Data" on page 620.
"Error condition"
Identifies various errors in the frame, see "Error Conditions"
on page 621.
Remote command:
SEARch:TRIGger:ARINc:TYPE on page 1721
Label setup: Condition, Label min, Label max
The label setup consists of the condition and one or two label patterns.
The label setup settings are the same as in the ARINC trigger setup, see "Label setup:
Condition, Label Min, Label Max" on page 620.
Remote command:
SEARch:TRIGger:ARINc:LABel:CONDition on page 1721
SEARch:TRIGger:ARINc:LABel:MIN on page 1722
SEARch:TRIGger:ARINc:LABel:MAX on page 1722
Data setup: Condition, Data min, Data max
The data setup consists of the condition and one or two data patterns.
The data setup settings are the same as in the ARINC trigger setup, see "Data setup:
Condition, Data Min, Data Max" on page 621.
Remote command:
SEARch:TRIGger:ARINc:DATA:CONDition on page 1721
SEARch:TRIGger:ARINc:DATA:MIN on page 1722
SEARch:TRIGger:ARINc:DATA:MAX on page 1722
SDI / SSM setup: SDI, SSM
The SDI / SSM setup consists of the SDI and SSM.
ARINC 429 (option R&S
RTP-K7)
To Next Page
Loading...
