Getting started
R&S
®
RTP
76User Manual 1337.9952.02 ─ 12
The following list describes at first the default toolbar functions and then the additional
functions.
Undo
Undoes the last setting actions step by step. Some actions cannot be revoked: locking
the touchscreen with [Touch Lock], and saving data. The undo stack is deleted during
the following actions: Reloading settings from file, and reference waveform actions
(save, load and preset with active reference waveform).
Redo
Recovers the undo steps in reverse order.
Help
Enables the tooltip display. A short description appears when you tap a parameter in a
dialog. To open the corresponding help topic, tap the "Show Help" button in the lower
right corner of the tooltip. See also: Chapter 3.3.11, "Getting information and help",
on page 86.
Graphical Saveset
Opens a window to select and load instrument settings that were previously stored in a
saveset. A graphical preview helps you to find the required settings.
Saveset
Saves the current instrument settings in a saveset.
You can reload the saveset using the "Graphical Saveset" toolbar icon, or using
"Menu" >"Save/Recall" > "Recall" tab > "Saveset with preview".
The filename is created according to the autonaming pattern, defined in "Menu" > "Set-
tings" > "Save/Recall" > "Autonaming" tab.
Image
Saves a screenshot of the current display using the settings defined in "Menu" >"Save/
Recall" > "Save" tab > "Screenshot".
Report
Creates a report of the current measurement settings and results using the settings
defined in "Menu" > "Save/Recall" > "Save" tab > "Report".
Clear
Deletes all measurement results including long term measurement and statistics, all
waveforms, and the history.
Remote command:
DISPlay:CLR on page 1181
Autoset and Preset
Performs an autoset, or a preset to a default state. The icons have the same function-
ality as the corresponding keys on the front panel. They are useful when you control
the instrument remotely.
Operating the instrument
To Next Page
Loading...
