Configuration Guide 802.1X Commands
Ruijie(config)# dot1x auto-req req-interval 50
Displays the authentication request information.
4.16 dot1x auto-req user-detect
Use this command to enable online user detection for auto-request authentication.
Use the no form of this command to disable online user detection for auto-request authentication.
dot1x auto-req user-detect
no dot1x auto-req user-detect
This function is enabled by default.
Global configuration mode
The following example enables online user detection for auto-request authentication.
Ruijie(config)# dot1x auto-req user-detect
Displays the authentication request information.
4.17 dot1x client-probe enable
Use this command to enable online user probe function.
Use the no form of this command to restore the default setting.
dot1x client-probe enable
no do1x client-probe enable
To Next Page
Loading...
Need help?
General