Ruijie RG-S29 Series

Configuration Guide 802.1X Commands
Command
Mode
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example displays the 802.1X setting.
Ruijie#show dot1x
802.1X basic information:
802.1X Status ......................... enable
Authentication Mode ................... eap
Authorization mode .................... disable
Total User Number ..................... 0 (exclude dynamic user)
Authenticated User Number ............. 0 (exclude dynamic user)
Dynamic User Number ................... 0
Re-authentication ..................... disable
Re-authentication Period .............. 3600 seconds
Re-authentication max ................. 3 times
Quiet Period .......................... 10 seconds
Tx Period ............................. 30 seconds
Supplicant Timeout .................... 3 seconds
Server Timeout ........................ 5 seconds
Maximum Request ....................... 3 times
Client Online Probe ................... disable
Eapol Tag ............................. enable
802.1x redirect ....................... disable
Private supplicant only ............... disable
Related
Commands
Command
Description
dot1x auth-mode
Sets the 802.1X authentication mode.
dot1x max-req
Sets the maximum number of authentication request
re-transmissions.
dot1x port-control auto
Sets the port to participate in authentication.
dot1x reauth-max
Sets the maximum number of the supplicant re-authentications.
dot1x re-authentication
Sets the re-authentication attribute.
dot1x timeout quiet-period
Sets the time the device waits before re-authentication.
dot1x timeout re-authperiod
Sets the re-authentication period for the supplicant.
dot1x timeout server-timeout
Sets the authentication timeout between the device and
authentication server.
dot1x timeout supp-timeout
Sets the authentication timeout between the device and the
supplicant.
dot1x timeout tx-period
Sets the re-transmission interval.
Platform
N/A