Ruijie RG-S29 Series

Configuration Guide 802.1X Commands
dot1x timeout re-authperiod
Sets the re-authentication period for the supplicant.
dot1x timeout server-timeout
Sets the authentication timeout between the device and
authentication server.
dot1x timeout supp-timeout
Sets the authentication timeout between the device and the
supplicant.
dot1x timeout tx-period
Sets the re-transmission interval.
Platform
Description
N/A
4.53 show dot1x auto-req
Use this command to display the auto-request authentication information.
show dot1x auto-req
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example displays the auto-request authentication information.
Ruijie# show dot1x auto-req
Auto-Req: Enabled
User-Detect : Enabled
Packet-Num : 0
Req-Interval: 30 Seconds
Related
Commands
Command
Description
dot1x auth-mode
Sets the 802.1X authentication mode.
dot1x max-req
Sets the maximum number of authentication request
re-transmissions.
dot1x port-control auto
Sets the port to participate in authentication.
dot1x reauth-max
Sets the maximum number of the supplicant
re-authentications.
dot1x re-authentication
Sets the re-authentication attribute.
dot1x timeout quiet-period
Sets the time the device waits before re-authentication.
dot1x timeout re-authperiod
Sets the re-authentication period for the supplicant.
dot1x timeout server-timeout
Sets the authentication timeout between the device and