Configuration Guide 802.1X Commands
4.61 show dot1x timeout quiet-period
Use this command to display the time for the device to wait before re-authentication quiet period after
the authentication failure.
show dot1x timeout quiet-period
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Use this command to display the time for the device to wait before re-authentication quiet period after
the authentication failure.
The following example shows how to displays the quiet period the time for the device to wait before
re-authentication after the authentication failure.
Ruijie#show dot1x timeout quiet-period
Quiet-Period: 10 Seconds
Parameter Description:
The time for the device to wait before re-authentication
after the authentication failure.
4.62 show dot1x timeout re-authperiod
Use this command to display the re-authentication interval.
show dot1x timeout re-authperiod
To Next Page
Loading...
