Configuration Guide 802.1X Commands
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Use this command to display the re-authentication interval.
The following example displays the re-authentication interval.:
Ruijie#show dot1x timeout re-authperiod
Reauth-Period: 3600 Seconds
Parameter Description:
Re-authentication interval.
4.63 show dot1x timeout server-timeout
Use this command to display the authentication timeout period.
show dot1x timeout server-timeout
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Use this command to display the authentication timeout period.
Use this command to display the authentication timeout period:
Ruijie#show dot1x timeout server-timeout
Server-Timeout: 5 Seconds
Parameter Description:
AuthenticationServer timeout periodinterval.
To Next Page
Loading...
