Configuration Guide Web Authentication Commands
Ruijie(config.tmplt.eportalv1)#
5.15 ip portal source-interface
Use this command to specify a communication port for the portal server.
Use the no form of this command to restore the default setting.
ip portal source-interface interface-type interface-num
no ip portal source-interface
No communication interface is specified by default.
Global configuration mode
The following example specifies an aggregate port as the communication port.
Ruijie (config)# ip portal source-interface Aggregateport 1
Use this command to set a surveillance port for the portal server.
Use the no form of this command to restore the default setting.
To Next Page
Loading...
Need help?
General