Ruijie RG-S29 Series - Page 1067

Configuration Guide Web Authentication Commands
port-num
The surveillance port of the portal server, which is on only the 2nd
generation portal server,
Defaults
The default is 50100 based on the UDP protocol.
Command
Mode
Template configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the surveillance port number of the eportalv2 server to 10000.
Ruijie(config.tmplt.eportalv2)#port 10000
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
5.17 show web-auth control
Use this command to display the authentication configuration.
show web-auth control
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example displays the authentication configuration and statistics information on the
interface.
Ruijie(config)#show web-auth control
Port Control Server Name Online User Count
------------------------- -------- --------------------- -----------------
GigabitEthernet 0/1 On <not configured> 0
Ruijie(config)#