Ruijie RG-S29 Series - Page 1087

Configuration Guide SCC Commands
6 SCC Commands
6.1 Identifier Description
The following is a list of command identifiers used in commands for reference:
Identifier
Description
vlanlist
Authentication-exemption VLAN list
interval
Authenticated-user online-status detection interval
thredshold
The traffic threshold of authenticated-user online-status detection
6.2 direct-vlan
Use this command to configure authentication-exemption VLANs.
direct-vlan vlanlist
Use this command to delete the authentication-exemption VLAN configuration.
no direct-vlan vlanlist
Parameter
Description
Parameter
Description
vlanlist
VLAN list, which can be a VLAN or a group of VLANs.
Defaults
By default, no authentication-exemption VLANs are configured.
Command
Mode
Global configuration mode
Default Level
14
Usage Guide
You can use this command to configure authentication-exemption VLANs, so that users in specified
VLANs can access the Internet without experiencing dot1x or Web authentication.
Configuration
Examples
The following example configures the VLAN2 as an authentication-exemption VLAN.
Ruijie(config)# direct-vlan 2
Verification
Use the show direct-vlan command to display the authentication-exemption VLAN configuration.
Prompt
Messages
N/A