Ruijie RG-S29 Series

Configuration Guide Global IP-MAC Binding Commands
7 Global IP-MAC Binding Commands
7.1 address-bind
Use this command to configure global IP-MAC address binding. Use the no form of this command to
restore the default setting.
address-bind { ip-address | ipv6-address } mac-address
no address-bind { ip-address | ipv6-address }
Parameter
Description
Parameter
Description
ip-address
IPv4 address to be bound
ipv6-address
IPv6 address to be bound
mac-address
MAC address to be bound
Defaults
N/A
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
The following example configures global IP-MAC address binding.Ruijie#
configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# address-bind 192.168.5.1 00d0.f800.0001
Related
Commands
Command
Description
show address-bind
Displays the IP address-MAC address binding
table.
Platform
Description
N/A
7.2 address-bind binding-filter logging
Use this command to enable the logging filter. Use the no form of this command to restore the default
setting.
address-bind binding-filter logging [ rate-limit rate ]
no address-bind binding-filter logging
Parameter
Parameter
Description